6101t6 Aluminum Flat Bar for Electrical Control Panel

- Jan 05, 2018 -

Basic Info

  • Model NO.: 6101

  • Application: Busbar, Electrical Control Panel

  • Technique: Extruded

  • Temper: T3 - T8

  • Alloy: Alloy

  • Tempers: T6

  • Length: 1000 - 10000mm

  • Specification: busbar

  • HS Code: 76061190

  • Shape: Rectangular

  • Certification: ASTM, GB, EN

  • Grade: 6000 Series

  • Surface Treatment: Mill Finish

  • Alloy No.: 6101

  • Thickness: 0.5-150 mm

  • Width: 50-2700mm

  • Transport Package: Wooden Pallet


Product Description

6101T6 aluminum flat bar for Electrical control panel

 6101 has considerably higher yield strength and better creep resistance than 1350. The alloy contained magnesium and silicon for high mechanical strength without significant reduction in conductivity. The strength of this alloy (6101) is obtained by suitable heat treaunents, occasionally combined with some cold work.

The common size of aluminum busbar, used for electrical control panel
a.       25MM X 6MM AL BUSBAR , 6101 GRADE, T6
b.      25MM X 10MM AL BUSBAR , 6101 GRADE, T6
c.       40MM X 6MM AL BUSBAR , 6101 GRADE, T6
d.      40MM X 10MM AL BUSBAR , 6101 GRADE, T6
e.      50MM X 6MM AL BUSBAR , 6101 GRADE, T6
f.        50MM X 10MM AL BUSBAR , 6101 GRADE, T6
g.       60MM X 6MM AL BUSBAR , 6101 GRADE, T6
h.      60MM X 10MM AL BUSBAR , 6101 GRADE, T6
i.         80MM X 6MM AL BUSBAR , 6101 GRADE, T6
j.        80MM X 10MM AL BUSBAR , 6101 GRADE, T6
k.       100MM X 6MM AL BUSBAR , 6101 GRADE, T6
l.         100MM X 10MM AL BUSBAR , 6101 GRADE, T6
m.    125MM X 6MM AL BUSBAR , 6101 GRADE, T6
n.      125MM X 10MM AL BUSBAR , 6101 GRADE, T6
o.      150MM X 6MM AL BUSBAR , 6101 GRADE, T6
p.      150MM X 10MM AL BUSBAR , 6101 GRADE, T6
q.      160MM X 6MM AL BUSBAR , 6101 GRADE, T6
r.        160MM X 10MM AL BUSBAR , 6101 GRADE, T6





Physical and Electrical Properties of Aluminum Wrought Bus Conductor Alloys
                                                               (ASTM B 236,B 317,and The Aluminum Association)

Applying to all alloys and tempers of wrought 
alloys, typical values.
 
Weight, lb/cu in. (rounded) 0.098
Specific heat, cal/gm/oC or BTU/LB/F 0.214 
at 70oC for 1350 and 0.220 for 6101(e).
 
Coefficient of thermat expansion (linear)/oC
 0.000023.
Specific gravity - 2.70.
Modulus of Elasticity, Typical, psi 10 * 106, up to 2% higher
 in compression.
 
Note : if two values are shown, the more favorable is "typical"; 
the less favorable is designated "minimum" provided a higher
 value is favorable. Otherwise the term "guaranteed" is 
sometimes used.
 
PropertiesAlloy and Temper
 1350
Any Temper
6101
 -T6
6101
-T61
6101
-T63
6101
-T64
6101
-T65
6101-T6
Typical
6063
-T6 typical
Thermal conductivity at 20oC,watts/sq.
 In /in /oC
5.9-6.05.3-5.45.5-5.65.4-5.55.7-5.85.7-5.83.95.1
Volume electrical conductivity at 20oC 
percent IACS(a).
61-6255-5657-5856-5759.5-60.556.5-57.542.4363(a)
Electrical resistivity (de) at 20oC (68F)
 microhms/sq.in./ft(c).
13.35-
13.14
14.81-
14.55
14.29-
14.04
14.55-
14.29
13.69-
13.46
14.42-
14.17
19.39-
18.94
15.37
Temperature coefficient of electrical 
resistance at 20oC /oC(d).
0.00403-
0.00410
0.00363-
0.00370
0.00377-
0.00383
0.00370-
0.00377
0.00393-
0.00400
0.00373-
0.00380
0.00284-
0.00277
0.00350


(a) Typical conductivities of 6101 alloys from Standards of The Aluminum Association. The conductivity of 6063·T6 alloy pipe for outdoor service may be taken as 55.% lACS for current ratings, per NEMA Standard.
(b) To obtain de resistance at 20"'C in microhms multiply table value by length in feet and divide by cross sectional area in sq. in.
(c) Increasing by 0.018 for each 100"C above 70'C (specific heat).
(d) The higher of a pair of coettlclents corresponds to the higher vafue of the pair of conductivity values.




                                          Temperature Coefficients of Resistance (dc) for Bus-conductor Aluminum Alloys 
                                                            And Representative Value for Commercial Copper Bus Bar
 
Aluminum Alloys and Tempers, And Conductivity % (IACS) (a)

 6061-
T6
Typical
6063-T6
Typical
6101-T6
Minimum
6101-T63
Minimum
6101-T6
Minimum
6101-T61
Typical
 6101-T64
Minimum
 1350 
Minimum
1350 
Typical
Representative 
Value
 Commercial 
Copper 
Busbar
% IACS
Temp. C.
40%53%
(b)
55%56%57%58%59%59.5%60%61%62%98%
0
10
20
25
.00279
.00271
.00264
.00261
.00377
.00363
.00350
.00344
.00392
.00377
.00363
.00357
.00400
.00384
.00370
.00363
.00407
.00391
.00377
.00370
.00415
.00398
.00383
.00376
.00423
.00406
.00390
.00382
.00427
.00409
.00393
.00386
.00431
.00413
.00396
.00388
.00438
.00420
.00403
.00395
.00446
.00427
.00410
.00401
.00417
.00401
.00385
.00378
30
40
50
60
.00257
.00251
.00245
.00239
.00338
.00327
.00317
.00307
.00351
.00339
.00328
.00317
.00357
.00344
.00333
.00322
.00363
.00350
.00338
.00327
.00369
.00356
.00344
.00332
.00375
.00362
.00349
.00337
.00378
.00364
.00352
.00340
.00381
.00367
.00354
.00342
.00387
.00373
.00360
.00347
.00393
.00379
.00365
.00352
.00371
.00358
.00345
.00334
70
80
90
100
.00233
.00228
.00223
.00218
.00298
.00289
.00281
.00274
.00307
.00298
.00290
.00282
.00312
.00303
.00294
.00285
.00316
.00307
.00298
.00289
.00322
.00312
.00302
.00293
.00326
.00316
.00306
.00297
.00329
.00318
.00308
.00299
.00331
.00320
.00310
.00301
.00335
.00325
.00314
.00305
.00340
.00329
.00318
.00309
.00323
.00313
.00303
.00294

 
(a) For alloys not shown. obtain conductivities from Table 13·2, and interpolate from the listed values.
 
(b) Per note on Table 1;3.2, 55% conductivity is much used as design basis for 6063·T6 alloys for tubes, hence coefficients should be taken from the column, headed 55%.

                                            Mechanical Properties of Aluminum Bus Conductor and Related Alloys
                            (The Aluminum Association ; ASTM B 236, B 241, and B 429; and Manufacturer's Listings)
 

ProductAlloy and TemperThickness in
Ultimates
Tensile Strength (ksi)
At 20 (68.F)
Typical 
Ultimate
Typical YieldTypical(a) 
Elongation
(Percent - in 2 in. 
Or 4 Dia)
Minimum 
Ultimate
Minimum 
Yield
Extruded rod, bar tube,
pipe and shapes
1350-H111All8.53.5  35.0
6101-T60.125-0.50029.025.032.028.015.0
6101-T610.125-0.749
0.750-1.499
1.500-2.000
20.0
18.0
15.0
15.0
11.0
8.0
   
6101-T63
6101-H111
6101-T64
6101-T65
0.125-0.500
0.250-2.000
0.125-1.000
0.125-0.749
27.0
12.0
15.0
25.0
22.0
8.0
8.0
20.0
14.011.0 
Extruded pipe(c)6061-T6
6063-T6
Pipe size 1.0 & 
over Pipe sizes,all
38.0
30.0
 
35.0
25.0
45.0
35.0
40.0
31.0
10.0 min
8.0 min
Rolled bar1350-H120.125-1.00012.08.014.012.0 
Sawed-plate bar or sheet1350-H1120.125-0.499
0.500-1.000
1.001-3.000
11.0
10.0
9.0
6.0
4.0
3.5
  10.0min
16.0min
22.0min
Rolled sheet
(for shearing or forming)
1350
1350-H12
1350-H14
0.020-0.2498.0
12.0
14.0
 12.0
14.0
16.0
4.0
12.0
14.0
20-30 min
4-9 min
3-6 min
1350-H16
1350-H18
0.020-0.12516.0
18.0
 18.016.02-4 min
2-4 min
Cast Alloy for Bus1350-F 
1050
1 in. And up  8.53.535.0
Cast Alloy for FittingsA356.0-T61 37.0   5.0

 

 

  • Aluminum Machinery Parts
  • Aluminum Garderobe Profile
  • 7050 Aluminum Sheet
  • Electronic Aluminum Foil
  • Bottle Cap Aluminum Foil
  • Aluminum Formwork Profile

Related Products