Aluminum Strip Processing Technology
Aluminum strip processing technology
Aluminum is cut through the aluminum coil formed by the deep processing of aluminum products. In the industry is an important raw material.
According to different alloying elements contained in aluminum, aluminum and aluminum are also divided into the same 8 series. However, the commonly used series is 1000, 3000, 5000 and 8000 series.
Depending on the annealed state of the strip, the strip can be subdivided into a fully soft (o-state) semi-hardened (H24) hardened (h18). The most commonly used should belong to the entire soft series, because the O state is relatively easy to stretch, bend.
Aluminum strip of the main processing equipment is the slitting unit, can be divided into the required length and width. Of course, the processing of slitting equipment is universal, you can also process the copper roll, processed products called copper belt.
At present, the international market for electronic products is no longer purely dependent on copper strip. As the conductivity of aluminum is only lower than that of copper, replacement of copper strip by aluminum strip is becoming an international trend.